Освещение вертолетной площадки.
Так могла-бы выглядеть вертолетная площадка - светящиеся элементы (серия Beta в белом цвете) обозначают контуры места посадки и служат визуальным ориентиром в условиях плохой видимости. Разумеется возможно применение цветных элементов или их чередование.
One of the most common problems of existing heliports is lighting. The point being, that the landing lights must be visible from a great distance even during foggy weather conditions. Typically, landing lighting systems are equipped with quite powerful lights, covered with orange (anti-fog) plastic caps. In such applications the landing pad is visible as a perimeter marked with blinking spots.
Our idea is to increase
the visibility of the landing pad by means of creating a landing pad which glows by itself.
This cannot be achieved with conventional lighting fixtures because they have to perform the following requirements simultaneously: be quite powerful, have a large enough glowing surface, be colored, water-proof, robust and able to work in blinking mode. All these features are implemented in Luxona's paving lights, type Beta for instance. Of course, such types of applications have to be carefully considered by engineers and architects but the obvious advantage in this case is that we achieve a bright constantly glowing and colored surface.
In the picture above, we can see such a type of an imaginary application implementing Luxona's paving lights in helicopter landing pad. Glowing elements have to be properly built into the surface in order to resist strong air flow during take-off & landing procedures. Colored (orange) and blinking paving elements can be visible even in foggy conditions. For such special applications, we are able to produce custom made products with an essentially stronger light output, clearly visible even from a great distance.